An introduction to the mixing tutorial. Also includes preparing files for a mixer, or what to request from your producers or tracking engineers using differing DAWs. Tempos and tempo changes are also addressed along with setting up main outputs and busses for creating a quick rough mix. All tracks in the song are also briefly reviewed followed by the song being played in its entirety.
Organize the Session
In this tutorial we begin to organize the session for the purpose of mixing more efficiently. Using Markers to label the sections of the song makes locating much easier. Adding colors to Markers is also addressed.
Continuing with organizing the session, we go thru track by track and re-name each track for clarity and based on what the track is actually playing.
In addition to renaming tracks, most modern DAWs allow us to Color Code the tracks. In this tutorial, we go through track by track and Color Code tracks based on their instrument and how easily it is to spot them in a complicated session.
Track Clean Up22:47
Cleaning up the tracks is an important part of mixing. Getting rid of extraneous and unwanted noise can really speed up the mixing process by allowing you to focus on just what the mix will be and avoid distractions in the later listening phase. Keeping regions to their correct size, will also speed up the visual part of mixing in a DAW.
Finally we put the tracks in the most logical order to speed up the amount of time it takes to find a specific track and make further adjustments. We also Lock our audio so that it can't be accidentally shifted during the mixing process.
Groups, Busses and FX
VCA Groups / Busses4:35
In this video we set up groups and busses to combine similar tracks to allow us to control things as sub groups and masters. Such as volume rides or muting and soloing specific groups to speed up the mixing process.
In this tutorial we set up FX Returns for things like Reverb and Delay to use DSP more efficiently and to make it easier to use sends for FX when sharing the same presets. Vocal Reverb using Redline Reverb by 112dB, Drum Reverb using Waves IR-1 and creating Ping Pong Delays are all discussed.
Mix Bus Compression9:35
In this video we go thru adding compressors and other effects to the mix buss to give it an overall polished sound and to make the mix sound more cohesive. Also addressed is pre-master buss metering to avoid overloading and unwanted distortion.
At this point we address some other non-mixing related issues that still affect the overall sound of our mix. Using Elastic Audio (in Pro Tools) we adjust the timing of our drum tracks and percussion.
We also address some tuning issues in our song. Using Auto-Tune, we adjust the tuning of our lead vocal using Graphic Mode for pitch correction in real-time.
Basic Vocal / Drum Mix
Basic Vocal Sound12:30
In this video we begin to actually mix the song. We start the mixing process by adjusting the lead vocal, getting a basic vocal sound. It's not the final sound, but it's really close and it allows us to build the rest of the song around the vocal, rather than the other way around. EQ, compression thanks to Softube's FET compressor, reverb and delay are all applied.
Basic Drum Mix12:56
Next we start to get a good drum balance to get a feel for what each track needs to do and what effects should be applied to create that effect.
Overheads & Hi-Hat9:04
In this video we begin getting the overall drum sound from our overhead mics. The goal is to make this the sound or centerpiece of our kit and build around it. EQ, compression (Massey's CT-4) and reverb are applied.
In this tutorial we dig in to the room micas on the kit and see how big and distant we can actually make the drums sound. In addition to EQ and compression, we use the Sonnex Oxford Transient Designer to re-shape the drum mics.
The Kick Drum12:46
As we begin to zero in on the close mics on the kit, we notice how much presence and thump can be applied by adding Samples to the kick drum. Not only do we add Samples to enhance the sound but we also find quick ways to make those triggers sample accurate.
The Snare Drum13:18
In this video we address the Snare drum and see how much crack we can create from it by using EQ, compression and Sonnex's Transient Designer. We also add a few samples to bring out some extra character in the snare.
The Tom Sound5:38
In this tutorial we go through and adjust the tom track using EQ and compression.
One of the tricks to creating a great drum track is to use parallel compression. It's also called 'NY Compression', which is when you buss the drums to 2 different stereo busses and compress one of them quite heavily and mix it in to taste. We make use of the Big Blue Compressor plugin by 112dB to create this powerful effect.
Snare / Tamb Overdub9:32
In this video we work on the snare overdub track along with the tambourine parts.
Bass and Keys
Working with bass guitar tracks can be especially tricky. In this video we divide the bass into 4 tracks to create different sounds to be blended together in the mix. Using the SansAmp plug-in and the Bass Amp Room plug-in by Softube gives us a few extra possibilities to create a well balanced low end to the song.
Wurlitzer & Organ13:59
In this video we adjust the Wurlitzer and the organ to cut through the track.
In this tutorial we adjust the main guitar to find a place in the panning field and cut through what is soon to be a dense mix. We make use of the Tube Tech EQ plug-in by Softube to give this guitar some much needed grit.
In this video we adjust the high guitar to find a place in the panning field and cut through. Adding reverb and delay to make it even more ethereal. We also make use of the Tube Tech EQ plug-in by Softube to give this guitar some much needed grit.
In this video we adjust the chorus guitar to find it's space in the mix.
The heavy guitars are meant to add just a little extra weight in the song, and we show how to achieve this without clouding up our sonic space.
At this point we adjust our verse pretty guitar to have a tremolo effect to create more interest in the verse. Sound Toys Tremolo plug-in is featured.
Riff & Octave Guitars7:26
Next we adjust the riff and octave guitars to find their place around the vocal in the more open verses.
Pick & Chicka Guitars10:57
Finishing up our guitars are the pick and "chick" guitars. Compression and EQ are used to allow these to cut through without getting in the way.
Piano and Mutes
In this video we adjust the piano to give it more top end without making it sound unnatural. The Toneluxe Tilt by Softube does an excellent job of creating a different type of EQ plug-in. Massey's CT4 compressor plug-in is also used to contain the sound.
Part of any good mix is taking out things that are just getting in the way or are just not that important. We go through and mute some of these non-essential parts to free up some sonic space.
Final Vocal Mix
The Lead Vocal17:23
At this point we're ready to really nail the lead vocal sound. We finalize it using some EQ notching, more compression and still more top end EQ. We also dig in using a manual approach to De-essing that involves volume riding gain riding for a more natural effect.
By using EQ, compression and reverb we find a nice place for our vocal harmonies to sit. De-Essing is also applied.
By using EQ, compression and reverb we find a nice place for our octave harmonies to sit. De-Essing is also applied.
In this video we use a trick to bring out the top end or breathiness in the vocals. By using parallel processing we create a super bright compressed version of our background vocals and mix them in with original to create a wall of prettiness that envelops our mix.
Automation and Final Mix
In this video we discuss how automation can create motion, dynamics and interest in an otherwise flat mix. By working section by section, rather than track by track, we can really focus in and make each part of the song special.
The Final Mix6:26
In this last video we discuss when a mix is finally completed, when to use loudness plug-ins on our reference mixes and finally play the finished mix from beginning to end.
Multi-Platinum Engineer and Producer Kenny Gioia is back with an incredible, in-depth series on mixing rock! This collection allows you to peak over Kenny's shoulder as he takes a multi-tracked rock production and mixes it from the ground up. If you want to see how a professional mixer works his magic, this series is a must see.
Kenny starts with the raw tracks and covers topics such as getting ready to mix, track preparation and correction, using VCA Groups or Busses, effects, mix bus compression, vocal and drum mixes, vocal harmonies and backgrounds, guitars, bass, automation, the final mix and so much more.
This is a rare chance to see how a professional, veteran music producer / engineer crafts a rock mix from beginning to end. What would you pay to sit in on a session and watch? Well, this is your ticket to the show.
Submitted 5 months ago
Typical Kenny Gioia: Efficient explanations, clear, understandable, no bla bla! Thank you for this great tutorial!
I am a: Hobbyist, Musician, Ableton Live, Reaper
Submitted 1 year ago
Really good, but...
Overall, this was really good! But the thing I was looking forward to see was how he EQ'd and compressed the kick drum. The fact that he used a layered sample on the kick to finish it up was very disappointing :(
I am a: Hobbyist, Musician
Submitted 1 year ago
Detailed and thorough
Covers a whole lot of the aspects of mixing a rock song. Easy to understand too
I am a: Semi-Pro, Musician, Reaper
Submitted 1 year ago
Now I´m starting to get to know Pro tools and mixing much better
I am a: Beginner, Musician, Pro Tools
Submitted 1 year ago
Thanks, I really saw it all coming together at last.
Submitted 1 year ago
This is awesome and extremely helpful.
This is the second series I've watched by Kenny and he's an awesome instructor. It's like sitting next to Kenny while he's mixing the song in a one-on-one apprenticeship session! He does a great job of explaining how to build a foundation and then keep building on that to end up with a solid mix at the end. He explains some tips and tricks, as well as pitfalls to avoid. I recommend this for anyone new to mixing, and he does things in a way that will work with any DAW. Great job, Kenny, and thanks for the priceless video library Groove3!
I am a: Beginner, Producer, Musician, Hobbyist
Submitted 1 year ago
Next level understanding
Groove3 makes understanding the mix process ...Sooo easy... should've invested earlier.
I am a: Mastering Facility, Professional, Audio Engineer
Submitted 1 year ago
This is a fantastic series of tutorials. Kenny is an amazing tutor.
I am a: Producer, Professional
Submitted 2 years ago
Kenny explains how to approach the incredibly subtle and technical task of mixing, and talks about it in a way where it looks easy. It is even starting to feel easy to me as I play with the steps in my DAW, and am seeing real progress!
I am a: Musician, Hobbyist
Submitted 2 years ago
More Like this Please Kenny!
Great Video Kenny! I've just watched this 'firts' mixing tutorial and cannot find fault at all. Really appreciate you showing your approach for this song. Any plans to make some more mixing tutorials? Would love to see how you would approach a simpler rock based band set up -- drums, bass, one guitar, one vocal.
I am a: Semi-Pro, Musician
You might be also interested in
The All-Access Pass gives you just that, instant online access to every single video tutorial currently on the site and any ones that get added during your membership.
Scottie Dugan follows up “Neutron Explained” with a video tutorial series on mixing a pop rock track exclusively with iZotope Neutron. See how you can now mix your own tracks easily with awesome results!
Multi-Platinum Engineer and Producer Kenny Gioia returns with an all-new mixing series, this time dedicated to mixing Heavy Rock / Metal! Step right up and see how Kenny sculpts an epic song by Days of Samara into a radio ready hit, explaining everything in detail as he goes.
Adam Pollard aka Multiplier, now focuses on Dynamics and Compressors and how they’re used in the Electronic Music genre to tame signals as well as create interesting effects and colors.
Times have surely changed regarding the way we work with and manipulate audio, as new options and techniques are constantly being developed and explored. Studio guru Chris Herrera bings the first volume of videos focused on these methods, looking at cool advanced bus routing and resampling ideas and practices.
Adam Pollard aka Multiplier, brings you the first of many series designed for the electronic music producer. In this series, Multiplier covers some basics and deeper sides of EQ, as well as how it’s utilized when producing electronic music.
Industry pro engineers, mixers and producers Bob Horn and Erik Reichers are pulling back the curtain, taking a home recordist’s non-pro mix and importing it side by side into their DAW, showing you in-detail how they would approach the mix in real-time, from start to finish. Get priceless tips and see where the improvements can be made and how to make them, creating a true professional, radio ready mix!
In this Groove3 video tutorial series, Eli Krantzberg shows you how to make a killer mix using nothing but the Waves Gold Bundle. See and hear the mix come together and to life, step by step. The individual tracks are also included so you can follow along and mix on your own studio system!
Phil Magnotti is a 3 time Grammy award winning, 20 time nominated Recording Mixing Engineer with over 300 major label credits to his name. Phil now reveals to you, his techniques and methods for mixing a track from scratch in Pro Tools, enabling you to get professional results out of your mixes.
Learn the nuts and bolts of mixing in Logic Pro X! Eli Krantzberg takes you on a mixing journey using nothing but LPX, showing you all the features and functions, steps, techniques and theories to use to create a professional sounding product. You also get the full Logic Project and audio files so you can mix or remix along in real-time!