Repairing Audio with RX 6
-
0:56 Introduction
Adam welcomes you and goes over what RX6 is and why it's an invaluable tool for audio repair and production.
-
11:13 Overview & How to Use RX 6
Adam now gives a complete overview of how to use RX 6, including coverage on the interface, Waveform / Spectrogram, Selection Tools, Preview / Compare Workflows, and everything else you need to get started.
-
5:00 Spectrogram
Adam now covers important Spectrogram Settings, and three examples with important features to become familiar with; Tones, Transients, and Noise.
-
3:36 Module Chain & Batch Processing
Learn how to use Module Chain and Batch Processing for when you need to do the same processes, over and over again.
-
2:12 Trimming, Saving, & Exporting
See how Trimming is kind of like "cropping" or shortening audio, and what settings to export at if you want to work on your audio again, before delivery.
-
6:45 Deconstruct
Explore how to use the Deconstruct module to separate, and remove if desired, tonal, noise, and transient components.
-
2:48 De-crackle Vocal One Shot
Learn all about De-crackle and how to remove subtle "low quality" imperfections.
-
4:14 Repairing Aggressive Bass & Brass
In this video Adam shows how to clean up an aggressive bass loop and brass loop, using De-crackle.
-
5:45 De-clip
Now learn about De-clipping, Makeup Gain, and combining this with the "Post-Limiter".
-
4:23 De-click
Explore De-clicking on a Kick, and then mouth clicks on a Vocal, as well as realizing its limitations!
-
7:14 Repairing a Flute Recording
Watch Adam use De-wind, EQ, and Spectral Repair, to clean up a flute recording.
-
1:57 Clip Gain
Learn how to use Clip Gain, including the strange way required to remove Nodes, and snap Nodes back to zero.
-
4:58 Normalization & Spectral Repair Region
Explore the Normalization feature and the Spectral Repair "Region" process, to remove an unwanted bird noise noise from a foley recording.
-
4:02 De-Noising Concepts
Adam now demonstrates two De-noising concepts on an Irish whistle recording. See how Voice De-noise isn't just for vocals, and Spectral De-noise "quality", isn't actually "quality".
-
4:02 Removing Unwanted Sounds
See how to remove some unwanted metallic "tings" using Spectral Repair, Brush Mode, and Instant Process.
-
1:07 Phase
Watch how to use the Phase Module to fix asymmetrical recordings, such as real drum sounds.
-
4:36 DC Offset
Learn what it is, why it's not wanted, and two ways to remove it.
-
2:27 Taming Harsh Snares with Spectral Repair
Discover how to use Spectral Repair to tame some snares in a drum loop.
-
6:03 Creative Center Extraction & Masking Trick
Explore Centre Extract (choosing an algorithm), as well as a masking trick using the plug-in module Reverb.
-
4:29 De-essing Options
Learn two ways to tame a harsh vocal, using Spectral Repair, and then the De-ess module, and when to use which.
-
3:09 Removing Side Distortion
Discover how to use Centre Extract to remove this special kind of unwanted distortion from your sounds!
Product Overview
Adam Pollard aka Multiplier, presents video tutorials on how to repair audio quickly and easily with iZotope RX6. See how to use the numerous tools RX6 offers to remove unwanted artifacts and imperfections from your audio!
Adam begins by welcoming you and goes over what RX6 is and why it's an invaluable tool for audio repair and production. He then jumps right in and gives a complete overview of RX6's user interface and everything you need to know to get started.
Then over the course of the series, you'll learn some of RX6's major features and functions such as the Spectrogram, Module Chain and Batch Processing, Trimming, Saving, and Exporting. Adam then covers different modules such as Deconstruct, De-crackle, De-clip, De-click, De-wind, De-noise and others, and how to use them in real-world situations.
Wrapping it up, Adam goes over lesser known and rarely covered topics like Normalization and the Spectral Repair Region function, Phase, DC Offset and others.
See the individual tutorial descriptions for more info. If you have the need to repair your audio, or you just want to see what RX6 is capable of, this series is for you. Watch "Repairing Audio with RX 6" today!
Why Users Choose Us
There are many things our users love about Groove3, but a couple always stand out at the top when asked why people choose us as their learning resource.
Quality Content
We meticulously craft professional quality tutorials that are thoughtful, informative and done with attention to detail. We stand behind our products with a 100% satisfaction guarantee and are trusted by 1000s of users every day.
Save Time & Money
Our library brings over 1700 hours of quality instruction to you fingertips and we release new content every week. Don't waste your valuable time scouring the web for information you may never find or is cumbersome to use and potentially can't be trusted.
Reviews
Submitted 3 days ago
An excellently presented & well balanced programme
Props to Multiplier for keeping this super interesting and very informative
I am a: Hobbyist, Musician, Studio One
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 1 month ago
Excellent!
Many thanks Multiplier! Very helpful
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 2 months ago
Helpful as Expected, but Unexpectedly USEFUL
I've seen enough of Adam (Multiplier) Pollard to know that I will get good info, helpful tips accurately explained and illuminated. This series of tutorials takes the typical "Post" workflow and environment that RX is designated for and shows how it could become an essential music production tool even for sound design and mixing. Adam shows very practical, easy to "hear and see" demonstrations and applications of the commonly used tools. This will be tremendously useful in my upcoming audio repair projects! But I may end up including RX more in my more creative sound design and mixing sessions.
I am a: Semi-Pro, Musician, Producer, Ableton Live
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 4 months ago
Helpful but with bad examples
Ok class but examples are many times too loud or confusing to really hear what the plugins are doing With a better choice it would have been much better The other rx6 tutorial is much better in my opinion.
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 1 year ago
Very informative and useful
Excellent course with clear examples and very good ideas. At the same time, some of the suggestions should be used with discretion, such as removing wind from flute playing. Removing this type of noise is a philosophical choice. Real instruments, with imperfect playing, can, in the right circumstances, present a very immersive experience.
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 2 years ago
informative, thanks!
Helped in improving my skills, thanks.
I am a: Semi-Pro, Musician, Producer, Audio Engineer, Sound Designer, Sound for Film/TV, Ableton Live, FL Studio
Ease of Use Quality of Videos Value of Training Access to Videos
Reviews
Submitted 3 days ago
An excellently presented & well balanced programme
Props to Multiplier for keeping this super interesting and very informative
I am a: Hobbyist, Musician, Studio One
Submitted 1 month ago
Excellent!
Many thanks Multiplier! Very helpful
Submitted 2 months ago
Helpful as Expected, but Unexpectedly USEFUL
I've seen enough of Adam (Multiplier) Pollard to know that I will get good info, helpful tips accurately explained and illuminated. This series of tutorials takes the typical "Post" workflow and environment that RX is designated for and shows how it could become an essential music production tool even for sound design and mixing. Adam shows very practical, easy to "hear and see" demonstrations and applications of the commonly used tools. This will be tremendously useful in my upcoming audio repair projects! But I may end up including RX more in my more creative sound design and mixing sessions.
I am a: Semi-Pro, Musician, Producer, Ableton Live
Submitted 4 months ago
Helpful but with bad examples
Ok class but examples are many times too loud or confusing to really hear what the plugins are doing With a better choice it would have been much better The other rx6 tutorial is much better in my opinion.
Submitted 1 year ago
Very informative and useful
Excellent course with clear examples and very good ideas. At the same time, some of the suggestions should be used with discretion, such as removing wind from flute playing. Removing this type of noise is a philosophical choice. Real instruments, with imperfect playing, can, in the right circumstances, present a very immersive experience.
Submitted 2 years ago
informative, thanks!
Helped in improving my skills, thanks.
I am a: Semi-Pro, Musician, Producer, Audio Engineer, Sound Designer, Sound for Film/TV, Ableton Live, FL Studio
1. When did you start dabbling in music?
I started producing music just over 5 years ago, right about when Skrillex's Scary Monsters and Nice Sprites EP dropped.
2. What training have you had?
I'm fully self-taught, and haven't had any formal training. I use online resources and learn a lot by talking to other producers about how they do things too.
3. When did you get into recording?
(same answer as number 1)
4. People you have worked with/for?
DJTechTools, iZotope, Output, CAPSUN Pro Audio, Loopmasters, Plugin Boutique, Industrial Strength, 5Pin Media
5. Why are you so good at training people?
I've had a lot of experience in the EDM space, from producing tracks and sample packs that have charted on sites like Beatport, through to DJing internationally and running a record label. And on the training side I've produced thousands of tutorials, and also tutor people one to one.
Products by Adam
-
tutorial videoAbleton Live 10: Tips & Tricks
Adam Pollard, aka Multiplier, delivers some of his best tips and tricks for Ableton Live 10. Discover and explore a vast range of topics covering workflow, editing, production, mixing and more, all allowing you to get the most from Ableton Live 10!
-
tutorial videoAbleton Live: Creating a Track from Scratch
Adam Pollard aka Multiplier brings you an in-depth video series all about creating a track from scratch with Ableton Live! Shown in version 10 but applicable to other versions and DAWs, see how to make a modern day track starting with just the kick drum, all the way to mastering and exporting the song for all the world to hear.
-
tutorial videoBeginner’s Guide to Mastering with Ableton Live
Adam Pollard aka Multiplier, delivers a mastering video tutorial series designed for the beginner, covering the important topics needed to master your music in Ableton Live! Learn the basic principles and terminologies, as well as specific steps to take to get great sounding master files that you can publish to the world.
-
tutorial videoBeginner's Guide to Music Production Hardware
Adam Pollard aka Multiplier presents an in-depth video series for those just getting into making music and the endless options for studio gear. Save endless hours of research trying to find answers to the most basic questions, when setting up your first studio and all the gear that goes with it!
-
tutorial videoCreating Electronic Music for Online Video
Adam Pollard presents a series of producing Electronic Music for Online Video tutorials! Learn how to design and produce Electronic music for the endless amount of video content found on YouTube, Facebook, Instagram, Spotify and more. These production videos are perfect for those who know how to use their DAW, but want to go deeper into the specifics of Electronic music creation for online video.
You might be also interested in
The All-Access Pass gives you just that, instant online access to every single video tutorial currently on the site and any ones that get added during your membership.
In this large assortment of priceless production help video tutorials, studio guru Adam Pollard aka Multiplier gives you tons of info to help you be confident that your tracks and productions are finished. Learn enlightening ways to test your mixes and song arrangements to determine if all your hard work is done, and will pay off big!
Studio guru Larry Holcombe presents an in-depth video guide to putting instruments "in the pocket"! Learn everything you need to know about placing instruments and grooves ahead or behind the beat, making things groove, and much more!
In this FREE Groove3 video tutorial series, iZotope wiz Scott Dugan covers the new features found in RX7! Learn just what the new features are and how to utilize them on your recordings.
Scottie Dugan brings you the most comprehensive set of video tutorials about iZotope's flagship repair and restoration suite, RX 6. This brand new series covers all versions of RX 6, including Elements, Standard and Advanced. So grab your audio, the doctor will see you now!
iZotope's RX 5 Audio Editor is in a class by itself when it comes to repairing, restoring, and enhancing audio. Likewise, Mike Thornton, Aka MR. Rx It, offers you the most comprehensive video tutorial series available, covering both RX 5 and RX 5 Advanced with a fine toothed comb filter, leaving no aspect of the software unexplored.
iZotope RX Final Mix is a real-time plug-in for smoothing out peaks in mixes and sub-mixes, and who better to guide you through it than “Mr. RX It” himself, Mike Thornton! In these five video training tutorials, Mike shows you the unique features of this plug-in and how to get the most out of them.
iZotope RX Loudness Control software delivers loudness control and management designed to meet global broadcast specifications. Follow along with studio expert Scottie Dugan and learn your way around this vitally important plug-in and get your song’s and production’s levels up to par!
iZotope RX 4 is here and iZotope guru Mike Thornton (Mr RX It) delivers everything you need to know to jump into RX 4 and harness its full potential! Get detailed information using real-world examples and clean up your recordings making them sound better than ever. No matter what DAW you use, iZotope RX 4 Explained provides expert knowledge that allows you to reduce unwanted noise and eliminate damage to your precious audio.
iZotope RX 3, the next generation of sound repair and restoration software has arrived! RX 3 master Mike Thornton (Mr RX It) reveals every feature and function of this in-depth industry standard solution, and shows RX 3 in action on real-world audio examples for a complete understanding of the RX 3 package. Wether you use the regular or "Advanced" version, this is the most comprehensive RX 3 video series available, so learn it right the first time, or just take your existing knowledge to the next level.
iZotope RX 2 is hands down one of the best and most complete audio repair toolkits on the market. Presented by Pro-Tools-Expert.com leader Mike Thornton, this collection of in-depth video tutorials will demystify all that is RX 2, giving you the knowledge to repair, enhance or manipulate, any audio you come by.
Studio wiz Fabio Lendrum presents a Native Instruments video tutorial series! Watch how to produce a song from start to finish, using only Native Instruments virtual synths and samplers. These videos are designed for those who are just getting started with NI products, or want more info on producing and using Native Instruments virtual instruments when composing. Presets and Audio used in the videos included!
Studio production pro Thomas Cochran teleports you back to the '80s with in-depth Synthwave production video tutorials that show how to create the sounds and produce the tracks that make this popular genre so powerful. These videos are perfect for beginner Synthwave producers or anyone looking for more insight on how this genre is made.