In this opening tutorial, Kenny sets the stage for properly mixing a Jazz Fusion song. Kenny goes over what this will entail and preview the before and after results.
Organizing the Session13:16
Next we dive in and talk about the key to mixing quickly and all of it's advantages. We begin to organize the session by re-naming and coloring tracks, cleaning up our audio and adding markers to the session.
Next, Kenny begins to get a rough mix while applying master buss fx and EQ to continually speed up the mixing process.
Basic Drum Sound & Overheads5:31
Kenny works on the drum tracks both globally and gets some close to final sounds for the Overhead Mics.
Drum Room Mics6:35
As we move on with the drum mics, we begin to work on the Room Mic and what it adds to the kit while dealing with the phase issues that it may add.
In this video, Kenny moves on to the close mic'ed drums. Focusing on the Kick Drum and adding some neat tricks to give it more low end and add sustain.
Kenny moves on to the close mic'ed Snare Drum and what it adds to the general drum kit sound. Compression and EQ are all discussed along with phase issues.
Drum Buss Parallel Compression6:22
To finalize our drum sound, we buss all the drums to a few different aux tracks and treat each of them differently using Buss or NY style Compression. This technique provides maximum flexibility in retaining the drum transients along with crushing compression possibilities.
The Bass Sound10:53
Next we move on to the Bass. Working with EQ, Compression and multying it to many tracks to create a unique sound while adding clarity.
Kenny moves on to the guitar tracks focusing on the intro guitar and adding amp and cabinet simulators to re-create and sculpt the sound of a real amp.
Next we move on to the main lead melody guitar which plays off the Sax as we find a unique place for each of them while also creating a sound.
Kenny tackles the Saxophone which plays in a few different sections. Not only do we treat each on with different processing but we also see the easiest way of accomplishing it.
During the Sax solo sections, an interesting guitar chord section appears with a slight chorus effect. We re-pan this part along with adding EQ and Compression.
Next we tackle the main guitar solo. Also adding guitar amp simulators but doing a bit differently this time while employing the direct sound along with EQ as well.
Fender Rhodes (Roland Space Echo)11:57
Throughout the whole song, we have a staccato Fender Rhodes tracks that stabs out the chords. We find a unique effect for this while also creating some psychedelic tape echo effects for the ending of the song.
Automation - Master FX12:50
Once all the tracks are working nicely together, we re-think our approach, make adjustments based on it and begin to automate all the tracks so they fit nicely in the mix and create interesting moments for the transitions.
And finally, in this video we simply play the finished mix down so you can hear the final results.
Multi-Platinum Engineer and Producer Kenny Gioia returns with an all-new mixing series, this time showing you how to mix a Jazz Fusion song. Watch Kenny mold the mix from a raw rough mix into a release-ready diamond.
Kenny begins by welcoming you and playing the before and after mixes of the song "Salt Peter" by NYC based Jazz Fusion group Handball. Before getting down to work, watch Kenny organize the session by renaming and coloring tracks, cleaning up audio, and adding markers to the session. Kenny then gets a quick basic mix going while applying Master Buss FX and EQ, to continually hone the mixing process.
Now it's time to dive into the drums. Kenny starts with the Overhead and Room Mics, then works on the Kick and Snare, all while sharing great tips and techniques for making the drums sound awesome. Moving on, Kenny tackles the Guitars beginning with the Bass. See how he works with EQ and Compression and sends it to many tracks to create a unique sound, while adding clarity.
From here it's on to the guitars. First focusing on the intro guitar and adding amp and cabinet simulators to re-create and sculpt the sound of a real amp. Next, Kenny focuses on to the main lead melody Guitar which plays off the Sax, as he finds a unique place for each of them in the stereo field creating a "sound". After getting all the guitars sitting nicely in the mix, Kenny works on the Sax which appears in a few different sections, treating each instance differently with unique processing.
Wrapping it all up, Kenny adds Panning and EQ to the Guitar chords that play during the Sax solo sections before tackling the Guitar solo. Kenny again adds guitar amp simulators to the Guitar solo, but does it a bit differently this time by including the direct sound along with EQ. Throughout the whole song a Fender Rhodes comps chords which Kenny finds a unique effect for, while also creating a psychedelic tape echo effect for the ending of the song.
Finally, after all the tracks are working together, Kenny automates them so they gel together in the mix and create interesting transitions when moving from section to section. If you record and mix Jazz Fusion, or any other type of instrumental music, check out "Mixing Jazz Fusion" today and see how to make your instrumental mixes sing!
Submitted 11 months ago
wish there was more instruments for him to mix and pan though.
I am a: Semi-Pro, Audio Engineer, Pro Tools
Submitted 11 months ago
Kenny again demonstrates his extraordinary competence at the console. I found myself arguing with some of his choices in this mix, yet in the end having to say "Well Done!"
I am a: Semi-Pro, Musician, Pro Tools
You might be also interested in
The All-Access Pass gives you just that, instant online access to every single video tutorial currently on the site and any ones that get added during your membership.
Adam Pollard aka Multiplier, brings you the first of many series designed for the electronic music producer. In this series, Multiplier covers some basics and deeper sides of EQ, as well as how it’s utilized when producing electronic music.
In this Homespun videos series, you’ll learn the skills every guitar player needs to play beautiful solos and create exciting improvisations. Jazz pro Mike DeMicco gives you a complete understanding of what jazz guitar is all about, taking you through a wide variety of scales, modes, arpeggios and chord voicings, and then teaches you how to practice them so you can move around the fingerboard with ease.
In this Vintage Homespun video series you’ll study with a jazz piano virtuoso and jam with some of the best Jazz players! Andy LaVerne delves into the intricacies of jazz improvisation, chord voicings, rhythm comping and other techniques in the modern jazz styles developed by Chick Corea, McCoy Tyner, Herbie Hancock, Keith Jarrett, Bill Evans and Andy himself.
Industry pro engineers, mixers and producers Bob Horn and Erik Reichers are pulling back the curtain, taking a home recordist’s non-pro mix and importing it side by side into their DAW, showing you in-detail how they would approach the mix in real-time, from start to finish. Get priceless tips and see where the improvements can be made and how to make them, creating a true professional, radio ready mix!
In this Groove3 video tutorial series, Eli Krantzberg shows you how to make a killer mix using nothing but the Waves Gold Bundle. See and hear the mix come together and to life, step by step. The individual tracks are also included so you can follow along and mix on your own studio system!
Phil Magnotti is a 3 time Grammy award winning, 20 time nominated Recording Mixing Engineer with over 300 major label credits to his name. Phil now reveals to you, his techniques and methods for mixing a track from scratch in Pro Tools, enabling you to get professional results out of your mixes.
A Jazz Guitar Licks Goldmine awaits in this incredible jazz collection! This Hal Leonard video series is jam-packed with tasty jazz lines, phrases, and improvisational ideas personally taught to you by professional guitarists John Heussenstamm, Don Linke, Paul Silbergleit, and Bill Stone.
Eli Krantzberg is your host on this epic journey of mixing with Slate plug-ins! See how a real-world mix takes shape from beginning to end, using only Slate Digital's awesome suite of plug-ins.
In these in-depth video tutorials, studio pro Larry Holcombe shows you how to use FabFilter's amazing plug-ins to mix a track from start to finish. Shot in Logic Pro X, the information is applicable to any DAW and will show you how to use FabFilter plug-ins effectively and creatively.