Master Mix Explained®
-
5:08 Signal Flow
Introduction to Master Mix and explanation of the signal flow through the processing blocks.
-
8:44 UI Walkthrough
In this video we explore the basic operation of the Master Mix UI, how to load factory presets, and how to turn on and off the various processors.
-
3:45 Faders & Meters
Learn the simple details about the Master Mix input and output faders and meters.
-
7:00 PreEQ
This video explains how you can manipulate the PreEQ graphic plot including using the high and low pass filters, three-band EQ, and choosing between shelving and peak filters for each band.
-
5:27 Multiband Dynamics Crossover
Let’s discuss the fundamentals of the Master Mix three-band dynamics processor and then learn how to set up the crossover frequency and slope.
-
6:30 Dynamics Contour Editor
Learn how to use the contour editor to set up the essentials of compression for each band, as well as how to add nodes for additional shaping.
-
5:40 Dynamics Key Filters
This video demonstrates how to control the key filters for each dynamics band.
-
3:58 Post EQ
This video tackles using the post EQ along with some general thoughts about when to use post EQ vs pre EQ.
-
2:31 Gate
How to use the Master Mix noise gate. Learn how to automate the gate to create a fade out.
-
5:01 Working with Presets
Explore some of the factory presets and get ideas for creating your own default setup.
Product Overview
Master Mix, Tracktion’s powerhouse mastering plug-in, includes six high end processing blocks as well as other sonic utilities. In this tutorial video series, studio guru Bill Edstrom dives deep and teaches you how to surgically correct your mixes and more with Master Mix.
Bill begins with a video on Master Mix’s signal flow through its six processor blocks. The next video walks you through the Master Mix UI, including how to load presets and activate and deactivate the various processors.
After that, Bill starts demonstrating the various elements of Master Mix with a video on faders and meters. That leads into an explanation of the PreEQ module, and how to utilize it’s various filters.
Moving on you’ll learn about the 3-Band dynamics processor, the dynamics contour editor and how to set up compression for each band, as well as how to add notes for additional tone shaping.
Bill then covers the Post EQ, along with offering advice on when to use post EQ vs. Pre EQ. Cool creative uses are then shown for inspiration when using Master Mix.
Wrapping it all up, Bill explains how you can use the factory presets to get ideas for creating your own custom default setup. If you’re new to Tracktion Master Mix or an advanced user looking for deeper information, don’t miss “Master Mix Explained” today!
Why Users Choose Us
There are many things our users love about Groove3, but a couple always stand out at the top when asked why people choose us as their learning resource.
Quality Content
We meticulously craft professional quality tutorials that are thoughtful, informative and done with attention to detail. We stand behind our products with a 100% satisfaction guarantee and are trusted by 1000s of users every day.
Save Time & Money
Our library brings over 1700 hours of quality instruction to you fingertips and we release new content every week. Don't waste your valuable time scouring the web for information you may never find or is cumbersome to use and potentially can't be trusted.
Reviews
Submitted 10 months ago
Essential tutorial for MasterMix
Excellent quality video. Direct and informative with some really useful tips. This is the missing manual for MasterMix. Very useful information about compression keys and the relationship with the dynamics contours. Also some very interesting EQ tips. Highly recommended.
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 1 year ago
Good.
A good author, lays out all clearly.
I am a: Student, Hobbyist, Semi-Pro, Professional, Musician, Producer, Beat Maker, Audio Engineer, Sound Designer, Game Designer, Mastering Facility, Sound for Film/TV, Reaper
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 3 years ago
ok. more examples with songs would work better for me.
i'm more of a hands on see it do it type. when he was using songs it started to synch in but he left the examples for more instruction too soon for me.
I am a: Hobbyist, Producer, Logic Pro
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 3 years ago
Excellent
The tutorial is clear and to the point, enabling full use of Master Mix.
I am a: Audio Engineer, Musician, Sound Designer, Hobbyist
Ease of Use Quality of Videos Value of Training Access to Videos
Submitted 3 years ago
Explains how to use Mater Mix!
I own this plug in, but did not know much about using it until I watched these videos. Very good.
I am a: Professional, Musician
Ease of Use Quality of Videos Value of Training Access to Videos
Reviews
Submitted 10 months ago
Essential tutorial for MasterMix
Excellent quality video. Direct and informative with some really useful tips. This is the missing manual for MasterMix. Very useful information about compression keys and the relationship with the dynamics contours. Also some very interesting EQ tips. Highly recommended.
Submitted 1 year ago
Good.
A good author, lays out all clearly.
I am a: Student, Hobbyist, Semi-Pro, Professional, Musician, Producer, Beat Maker, Audio Engineer, Sound Designer, Game Designer, Mastering Facility, Sound for Film/TV, Reaper
Submitted 3 years ago
ok. more examples with songs would work better for me.
i'm more of a hands on see it do it type. when he was using songs it started to synch in but he left the examples for more instruction too soon for me.
I am a: Hobbyist, Producer, Logic Pro
Submitted 3 years ago
Excellent
The tutorial is clear and to the point, enabling full use of Master Mix.
I am a: Audio Engineer, Musician, Sound Designer, Hobbyist
Submitted 3 years ago
Explains how to use Mater Mix!
I own this plug in, but did not know much about using it until I watched these videos. Very good.
I am a: Professional, Musician
1. When did you start dabbling in music?
I started on trumpet at age 10, but got more passionate when I picked up bass and guitar in high school. During college, I had a band where I shared lead vocals and electric guitar duties. After that I was in a variety of bands usually on bass or behind the mixing board.
2. What training have you had?
I studied electrical engineering in college but mostly learned recording and music on my own. Recently, I completed the Master of Songwriting and Guitar program through Berklee Music.
3. When did you get into recording?
I have always been fascinated with tape recording since fifth grade. I started by recording demos by bouncing back and forth between two cassette decks. Later I moved on to portastudios, ADATS, pro studios, then to a DAW based project studio.
4. People you have worked with/for?
I work with songwriters world-wide as the founder and creator of LilacWriter.com - an online collaboration site for songwriters. In my career, I have done FOH, producing, songwriting, mixing, mastering, and voice over. Used to work regionally, but now requests can come from anywhere in the world.
I've written two books on audio production: "Studio One for Engineers & Producers" and "The Power in Cakewalk SONAR" both published by Hal Leonard Books.
Whenever possible, I work closely with the developers of the products I teach doing testing, bug reporting, and feature requests. I think this gives me a much deeper understanding of the products. I really enjoy seeing the products I work with improve.
5. Why are you so good at training people?
I have always been interested in making technology easier to use and understand. I think showing examples is essential when introducing a topic. I feel recording should be a fun and creative experience and I hope that comes across in my videos.
Products by Bill
-
tutorial videoExtended FX Chains in Studio One 3
PreSonus gives you massive flexibility when creating effect chains using Extended FX Racks in Studio One 3. In this 8-video tutorial series, Studio One expert Bill Edstrom demonstrates how to create and use this innovative and powerful Studio One 3 feature.
-
tutorial videoiZotope DDLY in Action
In this “In Action” tutorial series, Bill Edstrom shows you around this unique dual-engine plug-in from iZotope and demonstrates how to use it creatively in your mixes!
-
tutorial videoMaster Mix Explained
Master Mix, Tracktion’s powerhouse mastering plug-in, includes six high end processing blocks as well as other sonic utilities. In this tutorial video series, studio guru Bill Edstrom dives deep and teaches you how to surgically correct your mixes and more with Master Mix.
-
tutorial videoMixing with SONAR
Learn to mix like a pro with SONAR! DAW master Bill Edstrom is back with another smash hit title, "Mixing with SONAR". You'll see the mix unfold, from beginning to end, with no stones unturned.. If you use SONAR, this is a must see.
-
tutorial videoMusic Creator 6 Explained
This in-depth video series picks up where the free Music Creator 6 videos leave off. Whether you're new to Cakewalk Music Creator 6 or just want to know more about it, this product is for you!
You might be also interested in
The All-Access Pass gives you just that, instant online access to every single video tutorial currently on the site and any ones that get added during your membership.
Gary Hiebner presents in-depth Digital Performer videos on mixing and mastering! Learn the first steps to take when getting ready to mix and master in Digital Performer, as well as more advanced workflows and tips & tricks. These Digital Performer tutorials are for those just starting out to mix and master with DP, as well as for more intermediate Digital Performer users.
In this Groove3 video tutorial series, mixer pro Fabio Lendrum shows you how to mix an electronic music production using UAD Plug-Ins! See it come together from scratch using a few stock DAW plug-ins and a collection of amazing UAD plug-ins to create a killer mix. The session files for the track are also included so you can follow along and make your own mix.
LA Mastering giants Lurssen Mastering presents a FREE, insightful and fun series on what makes Mastering tick, according to pro mastering engineers Gavin Lurssen and Reuben Cohen. Shot in a question / answer format, watch as these talented mastering engineers pick questions out of a hat and answer them honestly in 60 seconds, based on their many years of experience working with artists like Queens of the Stone Age, Miranda Lambert, T Bone Burnett, and productions like Thor, Black Panther and many more.
Desktop Mastering is a conceptual guide, intertwining a broad range of knowledge regarding audio engineering principles and practical applications for those wishing to enhance their own as well as their clients' work.
In Beyond Mastering, Steve Turnidge pulls back the veil to give a tour of the physics and philosophy driving the mastering engineer, and the internal state required for happiness and success.
Adam Pollard aka Multiplier, delivers a mastering video tutorial series designed for the beginner, covering the important topics needed to master your music in Ableton Live! Learn the basic principles and terminologies, as well as specific steps to take to get great sounding master files that you can publish to the world.
Pro music producer and engineer Laurence Holcombe takes you on a mastering journey with iZotope Ozone 8! See and hear how Ozone 8 can be used in numerous different ways to improve your mixes, as well as see it in action, mastering a wide variety of different genres of music.
iZotope guru Scottie Dugan reveals the new iZotope Ozone 8 mastering suite with in-depth video tutorials, covering all the hows and whys, including practical applications. See what this comprehensive collection of audio processing tools can do for you and your audio!
FREE VIDEO SERIES! iZotope Ozone 7 Elements has answered your call for a simple, professional sounding mastering solution for your DAW! Follow along with iZotope expert Scottie Dugan as he walks you through this amazing mastering tool.
Do you have a killer EDM song that’s ready to go, but needs that extra something before it’s ready for all the world’s dance floors? In this video tutorial series dance music guru Laurence Holcombe shows you how to polish your dance track, giving it that extra pump and sheen to really stand out amongst the sea of EDM tracks.
Tracktion calls T7 “the musicians DAW” and they’ve loaded it with lots of updates geared toward the recording artist. In this in-depth tutorial series studio master Bill Edstrom shows you how to get the most out of this powerful one-window creative studio tool!
With the release of Ozone 7, iZotope adds even more power and punch to its collection of essential mixing and mastering tools. In this FREE tutorial series, iZotope guru Scottie Dugan walks you through the major new offerings in Ozone 7, along with how to use them creatively in your own projects.