X
Ableton Live Tutorial

Ableton Live: Creating a Track from Scratch

  5.0   (3)  - log in to review
29 Videos | Length: 2hr 54min 56sec
Sample this tutorial...
Own it Forever
$30 $35 Download
Site All-Access Pass
$15 /month Get Your Pass
  • image description 1:16

    Introduction

    Adam welcomes you to the course and discusses what he will be covering.

  • image description 8:28

    Kicks

    In this tutorial, learn how to sequence and manipulate the kick drums. Adam shares various workflow tips, such as why he likes to work in arrangement view with a Loop Brace, instead of session view, and why he prefers to do kicks in audio, instead of MIDI. Also learn about tuning kicks, shaping the dynamics, and consolidating this into a loop.

  • image description 10:23

    Bass

    Explore Ableton's Wavetable instrument as Adam creates the bass from scratch. Assuming no prior synthesis knowledge, he explains and demonstrates the fundamental sound design concepts: wavetable synthesis, envelopes/ADSR, and modulation. Adam further pieces all this together by explaining workflow, how to "find your sound", sidechain compression, as well as a few miscellaneous tips (such as which bass notes you can and can't use in electronic music).

  • image description 6:12

    Sidechain Compression

    In this video, we dive deeper into sidechain compression, learning the main three parameters (ratio, threshold, release), and how we can use these to dial in the rhythm. Adam also explains and shows how to avoid "hold down". Finally, he touches upon a trick to set up smoother sidechain compression, using "FF1 Mode" with a 10ms lookahead.

  • image description 4:19

    Bass Processing

    Now follow along as we fill out the bass' frequencies by applying some processing. Specifically, we use "Sub Osc" to enhance the root note/fundamental, and saturate with Overdrive to fill out the higher frequencies. Discover Dry/Wet, setting bass level by eye, and grouping these devices into a rack to save for later use.

  • image description 7:40

    Vocal One Shot

    Here Adam uses the Sampler instrument, to create a vocal one shot on the "off beat". Explore pitch envelope modulation to add punch/definition, and how to set root note to tune it. Adam also shows a range of important workflow tips, such as moving "sample start" as it's playing, to much more quickly and enjoyably choose the section of vocal to work with.

  • image description 12:16

    Lead Synth

    In this video, Adam creates a lead synth from scratch, using the Wavetable instrument. Adam builds upon ideas discussed in the previous video designing the bass, introducing new concepts: unison (for thickness), LFO modulation (for looping modulation), and using pitch bends to write a melody. He also shares some workflow tips, such as how to take a 2 bar melody, and extend it into a 4 bar melody.

  • image description 6:22

    Bass & Lead Sequencing

    Learn some key principles behind sequencing an 8 bar section. Here Adam is sequencing the bass and lead parts, but the concepts underlying this apply to other elements too. Explore color coding strategy, extending loops, trimming unneeded MIDI, and naming conventions.

  • image description 6:59

    Riser

    In this tutorial, Adam inserts a riser. It sounds simple, but he covers a few very important things to watch out for, e.g. warp mode imperfections, and high pass filtering unwanted low frequency rumble. I also sidechain compression this, and automate the ratio (increasing "pumpy-ness" over time), to add some subtle but interesting variation.

  • image description 9:15

    The Intro

    In this video, we start the intro. First, Adam tunes the the vocal Sampler the full and proper way. Then, he explains how to view phrasing and arrangements (in blocks of 4, 8, 16 bars), providing a framework for viewing and thinking about the arrangement. Adam also includes a wide range of useful little tips, such as why you shouldn't start at bar 1, and how to create another bass which is similar, but different to what we already have.

  • image description 3:56

    Second Bass

    Next, Adam creates the second bass, again using Wavetable. He uses some previously explored ideas, but more importantly, he shows how he made the full section flow, by using the rhythm from the 2nd half of the lead, as the defining modulation for this new bass.

  • image description 5:34

    Reverb

    Let's get creative with reverb. By bouncing it out as audio, Adam can manipulate it, chop it up, fade it in, and more generally treat it more as its own instrument. Explore freeze/flatten, how to work around the sidechain compression error message, and how to, if unsure, deactivate a clip, instead of deleting it (allowing us to reactivate it later, if we change our mind).

  • image description 3:57

    Percussion Loop

    In this tutorial, Adam shows everything you need to know about adding a percussion loop. It sounds simple, but there are a few things to know that are easy to overlook. E.g. the auto-warp preference, audition volume, and auditioning (in time) as it's playing. Adam also chops it up, and adds some sidechain compression, to make it flow.

  • image description 3:06

    Going Further with Vocal One Shot

    Let's go further with this vocal one shot. Adam first chooses a better note, illustrating the power of perfect fifths (seven semitones). Then I add an Echo effect to make it more interesting, "hot swapping" as it's playing.

  • image description 8:29

    Vocal Build Up

    Let's now finish up the vocal one shot. Learn about filter sweeps, and how you should use Auto Filter, not EQ 8. Then, see how to turn this vocal idea into a build up. We learn about bouncing to audio, keeping backups, consolidating, frequency shift vs transposition (inharmonic vs harmonic build), the trick to automating "warp transpose" (MIDI clip envelopes), and choosing a logical amount of pitch transposition.

  • image description 4:24

    Intro Hi-Hat Loop

    In this video, Adam adds a hi-hat loop to the intro. Again, it sounds simple, but he demonstrates some important workflow ideas in the process (creating reverse fills, extending loops, color coding, and adding subtle filter sweeps).

  • image description 4:24

    Linking Phrases

    Discover the main idea behind linking phrases (sections of the track). To do this we take a bit of the drop, and add a high passed version of this, to the build. Learn about automation, grouping, and how to sidechain compress without adding kicks to the track (sometimes called "Ghost Kicks").

  • image description 5:50

    Build Up Snares

    In this tutorial, Adam creates the build up snares, exploring velocity and rhythm. He uses Simpler and velocity variation to create a rhythm. He takes this further than usual though, by adding filter cutoff velocity sensitivity too (mirroring real life), to make it sound more interesting, and realistic. I finish by mapping a useful control to a macro, for future consideration.

  • image description 13:34

    Details & Variations

    Now let's add some details and variations. See the real-life process of automating, re-sequencing, and fixing things up. This includes automation, low pass filtering, EQ, and experimenting with the vocal one shot (stretching, with different warp modes), to see what works, and what doesn't. As you'll see here, sometimes ideas don't work, and sometimes the simpler solution, is the better solution.

  • image description 5:44

    Second Drop

    Learn how to create the second drop. The big idea is to the copy the first drop, and change either the sound, the melody, or the rhythm. Adam tries a few options, before deciding to change the drum rhythm (to a "half time" rhythm). Discover what's important about the 16th grid, and how to use ghost kicks and intermittent double sidechain compression, for a deeper pump, and additional rhythm.

  • image description 4:53

    Generating SFX

    Explore generative workflows, as Adam uses a generative workflow to create some sound effects for the track. This uses current parts of the track, to make the resulting sound effects feel more coherent, more like they are a part of the track. It's also a quick and fun way to make sounds. Learn some tricks for working with reverse SFX, and how to maximize a clip's waveform, to make it nicer to work with.

  • image description 3:25

    Sequencing SFX

    In this video, Adam sequences the SFX I made in the previous video. In the process, he shares some useful little workflow tips and tricks, such as how to drag a copy, and drag unquantized.

  • image description 6:09

    More Filter Sweeps

    Let's do some more work with the filter sweeps. Adam first fixes a mistake Ableton made. Then he shows how to use filter sweeps to create a transition. He also automates device on/off, and explain how, when doing so, you need to watch for discontinuity clicks!

  • image description 8:33

    Arrangement

    In this tutorial, Adam finishes up the arrangement. Learn about the writing concept "Kill Your Darlings" (be comfortable deleting something you've spent a lot of time working on). He also shares some fundamental arrangement principles, such as how to create a break and an outro, from existing sections. As well as a few specific workflow tips, such as checking automation, and checking for newly added fades, when deleting kicks.

  • image description 7:11

    Filling Out the Mix

    In this video, Adam shows how to fill out the mix. He fills out the drop with pink noise (shaping it with EQ). Adam then fills out the build snares by layering a kick underneath. He also explains some important workflow ideas for doing all this, such as when and when not to solo a track, why he doesn't always use racks, and why it's important to always use automation lanes.

  • image description 3:14

    Setting Levels

    Learn how to efficiently and effectively set levels. Adam shares the best workflow for doing this (splitting clips onto different channels), and how you should automate utility (not the track fader!) to change the level over time. He finishes off by adding a few subtle details, including an interesting "manual delay".

  • image description 1:29

    High-Pass Everything

    See how to clean up the low end, by adding a high pass filter to everything (apart from the kick and bass). And if you're feeling lazy (or maybe your project is massive), Adam shares the best default setting. Also, where in the processing chain you should put it!

  • image description 5:05

    Mastering & Exporting

    Now let's do a basic master, and export the track. Learn about loudness, how to set limiter gain, what to watch for before clicking export, and the export settings themselves (render start, length, bit depth, etc..). Also see how we should add a 16th note of silence at the beginning and end of the track, to make sure we don't lose anything in the encoding process.

  • image description 2:49

    Full Playthrough

    Listen to a full play through of the track - not that it matters too much, as this course is about ideas, techniques, and workflows. We all like different music, and that's part of the fun!

Product Overview


Adam Pollard aka Multiplier brings you an in-depth video series all about creating a track from scratch with Ableton Live! Shown in version 10 but applicable to other versions and DAWs, see how to make a modern day track starting with just the kick drum, all the way to mastering and exporting the song for all the world to hear.

Adam welcomes you and begins with the all-mighty kick drum and includes workflow tips, tuning kicks, shaping its dynamics, and consolidating the part into a loop. Then follow along and see how to craft a complimentary bass sound and part using Ableton’s Wavetable virtual instrument.

Sound processing is then shown and you'll learn the fine art of sidechain compression, using a ‘Sub Oscillator’ to enhance the root note/fundamental of the bass sound, saturate with Overdrive to fill out the higher frequencies of content and much more.

Vocal One Shots and Lead Synths are next, and you'll see exactly how to create these instruments and get creative with them in the production and arrangement. Risers, and working on more parts and instruments are then shown in-detail, with tons of tips and tricks and helpful ideas for making a production that sounds modern and powerful.

Throughout the rest of the videos Adam covers build ups, variations, drops, sound effects, filter sweeps, how to fill out the mix, basic mixing and mastering ideas, how to properly export your song and more.

See the individual tutorial descriptions for more info. If you want to see someone craft a modern sounding production in Ableton Live from scratch, stop right here… Watch “Ableton Live: Creating a Track from Scratch” today.


Why Users Choose Us

There are many things our users love about Groove3, but a couple always stand out at the top when asked why people choose us as their learning resource.

Quality Content

We meticulously craft professional quality tutorials that are thoughtful, informative and done with attention to detail. We stand behind our products with a 100% satisfaction guarantee and are trusted by 1000s of users every day.

Save Time & Money

Our library brings over 1700 hours of quality instruction to you fingertips and we release new content every week. Don't waste your valuable time scouring the web for information you may never find or is cumbersome to use and potentially can't be trusted.


dwoods
Submitted 3 days ago

Actually very helpful

Great to see a tutorial like this by Multiplier. Was happy to stumble across it. Provided many other ways of thinking about things, and in some cases, brand new insights. Highly recommend.

I am a: Student, Hobbyist, Beat Maker, Ableton Live


Ease of Use
 
 
 
 
 
Quality of Videos
 
 
 
 
 
Value of Training
 
 
 
 
 
Access to Videos
 
 
 
 
 

Vivelavida
Submitted 3 weeks ago

The best!

I love this guy's way of teaching ! The best here I think!


Ease of Use
 
 
 
 
 
Quality of Videos
 
 
 
 
 
Value of Training
 
 
 
 
 
Access to Videos
 
 
 
 
 

TopKnife
Submitted 1 month ago

Amazing

Although I do not like this kind of music, I thought this course was amazing!!! I really learned a lot with all those tricks the instructor uses...

I am a: Hobbyist, Musician, Producer, Ableton Live, Logic Pro


Ease of Use
 
 
 
 
 
Quality of Videos
 
 
 
 
 
Value of Training
 
 
 
 
 
Access to Videos
 
 
 
 
 

dwoods
Submitted 3 days ago

Actually very helpful

Great to see a tutorial like this by Multiplier. Was happy to stumble across it. Provided many other ways of thinking about things, and in some cases, brand new insights. Highly recommend.

I am a: Student, Hobbyist, Beat Maker, Ableton Live

Ease of Use
 
 
 
 
 
Quality of Videos
 
 
 
 
 
Value of Training
 
 
 
 
 
Access to Videos
 
 
 
 
 

Vivelavida
Submitted 3 weeks ago

The best!

I love this guy's way of teaching ! The best here I think!

Ease of Use
 
 
 
 
 
Quality of Videos
 
 
 
 
 
Value of Training
 
 
 
 
 
Access to Videos
 
 
 
 
 

TopKnife
Submitted 1 month ago

Amazing

Although I do not like this kind of music, I thought this course was amazing!!! I really learned a lot with all those tricks the instructor uses...

I am a: Hobbyist, Musician, Producer, Ableton Live, Logic Pro

Ease of Use
 
 
 
 
 
Quality of Videos
 
 
 
 
 
Value of Training
 
 
 
 
 
Access to Videos
 
 
 
 
 

1. When did you start dabbling in music?

I started producing music just over 5 years ago, right about when Skrillex's Scary Monsters and Nice Sprites EP dropped.

2. What training have you had?

I'm fully self-taught, and haven't had any formal training. I use online resources and learn a lot by talking to other producers about how they do things too.

3. When did you get into recording?

(same answer as number 1)

4. People you have worked with/for?

DJTechTools, iZotope, Output, CAPSUN Pro Audio, Loopmasters, Plugin Boutique, Industrial Strength, 5Pin Media

5. Why are you so good at training people?

I've had a lot of experience in the EDM space, from producing tracks and sample packs that have charted on sites like Beatport, through to DJing internationally and running a record label. And on the training side I've produced thousands of tutorials, and also tutor people one to one.

Products by Adam

  • image description
    tutorial video

    Ableton Live 10: Tips & Tricks

    Adam Pollard, aka Multiplier, delivers some of his best tips and tricks for Ableton Live 10. Discover and explore a vast range of topics covering workflow, editing, production, mixing and more, all allowing you to get the most from Ableton Live 10!

  • image description
    tutorial video

    Ableton Live: Creating a Track from Scratch

    Adam Pollard aka Multiplier brings you an in-depth video series all about creating a track from scratch with Ableton Live! Shown in version 10 but applicable to other versions and DAWs, see how to make a modern day track starting with just the kick drum, all the way to mastering and exporting the song for all the world to hear.

  • image description
    tutorial video

    Beginner’s Guide to Mastering with Ableton Live

    Adam Pollard aka Multiplier, delivers a mastering video tutorial series designed for the beginner, covering the important topics needed to master your music in Ableton Live! Learn the basic principles and terminologies, as well as specific steps to take to get great sounding master files that you can publish to the world.

  • image description
    tutorial video

    Beginner's Guide to Music Production Hardware

    Adam Pollard aka Multiplier presents an in-depth video series for those just getting into making music and the endless options for studio gear. Save endless hours of research trying to find answers to the most basic questions, when setting up your first studio and all the gear that goes with it!

  • image description
    tutorial video

    EDM Songwriting & Production

    Adam Pollard aka Multiplier returns with a powerhouse 3-hour tutorial series that teaches you the important fundamentals of EDM songwriting and production. Experience and learn how to create your own pulsing, grooving, and inspiring EDM Tracks!

You might be also interested in

In this large assortment of priceless production help video tutorials, studio guru Adam Pollard aka Multiplier gives you tons of info to help you be confident that your tracks and productions are finished. Learn enlightening ways to test your mixes and song arrangements to determine if all your hard work is done, and will pay off big!

Adam Pollard aka Multiplier presents an in-depth video series for those just getting into making music and the endless options for studio gear. Save endless hours of research trying to find answers to the most basic questions, when setting up your first studio and all the gear that goes with it!

Electronic Music guru and producer Morgan Potruff shows you how to produce a track in the style of Marshmello! See how to create a professional sounding electronic track from scratch, with explanations all along the way. You also get the individual tracks to experiment with and remix.

The All-Access Pass gives you just that, instant online access to every single video tutorial currently on the site and any ones that get added during your membership.

Adam Pollard aka Multiplier, delivers an in-depth series all about using Ableton Live's MIDI Effects creatively, to make more interesting and impactful parts for your songs and productions!

Super producer Paul Ortiz pulls back the curtain on the style of Post Malone in this in-depth U Produce™ series! See how to make an authentic track in the style of Post Malone step by step from scratch. Shot in Reason 10, the ideas and techniques will work with any DAW, and the Reason 10 session is also included!

Electronic Music wiz and educator Morgan Potruff reveals the formula for creating a track from scratch in the style of electronic music greats Jack Ü. Learn the techniques and tricks used to authentically create this popular electronic music genre in this in-depth U Produce™ video series. You also get the individual tracks to experiment with and remix!

In this course, Josh Bess opens up his own personal live session in Ableton Live, to explain how to turn a small and simple idea into a full music arrangement, ready for live performance and/or an official release. Josh discusses many ways to get you started with building your ideas, along with other tips and tricks to incorporate into your own original music creation, no matter what style of music you are creating.

In this course, Josh Bess explains how the type of drum grooves you create along with the sound choices you use will completely change the genre of music you are creating. Josh discusses ideas focused on drum rhythm creation, MIDI note editing, sound design choices, groove, swing, feel, and many other related topics asked throughout the live webinar.

In this video tutorial series, Toontrack guru Luke Oswald and vocal extraordinaire Spencer Hansen return, and this time create a stunning Dream Pop song from scratch, using only Toontrack products and a DAW. See it built from nothing, all the way to mix and master!

In this video tutorial series, Toontrack expert Luke Oswald walks you through the process of creating a funky fusion track from scratch using only Toontrack EZdrummer 2, EZKeys, Superior Drummer 2 and EZmix 2. Get your groove on!

In this video tutorial series, Toontrack guru Luke Oswald and vocal extraordinaire Spencer Hansen create a groovy Neo Soul song from scratch, all the way to master mix using only Toontrack products and a DAW. Plus, the info can be applied to any genre too!

Ableton Live includes everything you need to take your creative spark and turn it into a shareable masterpiece. In this video tutorial series, dance music hitmeister Timothy Allan takes you from start-up to wrap-up!

Ableton Live: Creating a Track from Scratch is rated 5.0 out of 5 by 3 .
Rated 5.0 out of 5 by from Actually very helpful Great to see a tutorial like this by Multiplier. Was happy to stumble across it. Provided many other ways of thinking about things, and in some cases, brand new insights. Highly recommend.
Date published: 2019-05-20
Rated 5.0 out of 5 by from The best! I love this guy's way of teaching ! The best here I think!
Date published: 2019-05-01
Rated 5.0 out of 5 by from Amazing Although I do not like this kind of music, I thought this course was amazing!!! I really learned a lot with all those tricks the instructor uses...
Date published: 2019-04-28
We use cookies to personalize content and ads, to provide social media features and to analyze our traffic. We also share information about your use of our site with our social media, advertising and analytics partners. By continuing to use this site you agree to the use of cookies. View Privacy Policy