The Keyboard Controls
A Tour of the Keyboard6:13
Get a brief introduction to the layout and architecture of the Novation Impulse keyboard controls.
Loading & Saving Templates4:03
Twenty user definable templates are available that determine how your Novation keyboard will work. Learn how to save modifications to templates and how to "save as" to new locations.
Transpose, Keyboard & MIDI Channels2:47
learn how to transpose the keyboard by octaves or semi tones, how to set which port is used, the keyboard's velocity sensitivity, and which MIDI channel it will transmit on.
Global Setup Controls4:42
See how to set the global controller settings that are non template specific, and apply to the overall functioning of the Impulse.
Working with Zones4:25
With zones, the Impulse keyboard can be split into 2, 3, or 4 separate or overlapping regions; each having it's own MIDI channel, port assignment, and keyboard range. It's great for triggering multiple instruments in various ranges on the keyboard. Watch as we set the Impulse up to split the keyboard into two separate zones.
The Hidden Modes3:49
Learn how to use Preview mode to verify assignments without transmitting data, how to send program change messages to external or software devices, and how to use Boot Mode to verify the keyboard's firmware version and restore the factory defaults.
Mapping the Faders3:24
Discover how faders are mapped to send either CC, RPN, or NRPN MIDI messages in the Controls menu when the keyboard is used in Template mode as opposed to Automap mode.
Mapping the Buttons4:31
Buttons have the added functionality of being able to trigger notes and send program and bank change messages. Learn how buttons function in their normal, momentary, toggle, and step modes.
The Arpeggiator in Action2:25
Watch as the Impulse's 8 pads are used in real-time to modify the arpeggiator's rhythms while the performance is simultaneously captured into Logic Pro.
Learn how to control and modify various aspects of the notes that are generated by the arpeggiator, including the rhythmic value, duration, swing, direction, range, and number of steps.
See how the roll button is used to generate velocity sensitive rolls when drum sounds are played from the pads.
Setting up Automap
Automap in Pro Tools6:50
Learn how to setup your Automap software to work with Pro Tools and RTAS plug-ins in HUI mode. This will automatically map your keyboards knobs, buttons, and encoders to the mixer and plug-ins within active Pro Tools sessions.
Automap in Logic6:52
Watch as we setup Automap software to work with Logic and it's accompanying Audio Unit plug-ins. See how all the relevant Control surface settings and Environment cabling are configured.
Discover 5 simple and easy key strokes that allow you to stretch the functionality of how your faders, buttons, and encoders are mapped.
Edit Mapping Window Overview5:00
Learn how to manage all your mappings in the Edit Mapping Window.
Manual Parameter Mapping3:40
See how to use the Edit Mapping Window to manually re-map specific plug-in parameters to specific encoders, and then save it all as a recallable mapping file.
Re-Mapping using the Learn Button3:41
Discover how to use the Learn button on your Novation hardware to remap plug-in controls, without having to use the Edit Mapping Window.
Beyond the Basics
See how to program Novation buttons to perform your favorite DAW based QWERTY shortcuts.
Creating Additional Mixer Pages2:04
Learn how to create and toggle between additional functions for your hardware faders by creating new mixer pages in the Edit Mapping Window.
Volume & Sends Simultaneously2:28
See how to set up your encoders to work the mixer send levels at the same time your faders control the mixer's volumes.
Editing Encoder Parameters4:53
Learn how some of the encoder range values effect how the hardware interacts with the the controls they are mapped to.
Editing Button Range Parameters4:21
Discover how the different button modes work, and how setting the various range parameters effects their ranges and resolution.
Editing the Slider Range Values5:00
See how the normal and inverted modes affect slider response, and how the range values are used to modify the range of the sliders influence over the parameter being controlled.
Controlling Stand Alone Software2:56
Learn how the Automap MIDI ports work, and see how easy it is to assign hardware controls to parameters in stand alone software not directly supported by Automap.
Do you use a Novation Impulse keyboard controller? This awesome, in-depth series from studio meister Eli Krantzberg will reveal all of the amazing features and functions found in the Novation Impulse, as well as how it uses Automap to further enhance its operation.
Eli starts off the series with tour of the keyboard, loading and saving templates and using transpose and MIDI channels. He then goes deeper into the Impusle by ways of the powerful Automap software. He shows you how to map faders and buttons, explains the edit mapping window, manual mapping, re-mapping and much more. He then shows advanced features such as using the arpeggiator and Roll Mode, QWERTY assignments,editing encoder parameters, controlling stand alone software and so much more.
If you're using a Novation Impulse as your controller keyboard, this series is hands down a must see... Watch "Novation Impulse Explained" today.
Submitted 5 months ago
Novation Impulse Controller Keyboard
Great for refreshing knowledge on equipment that you haven't used in awhile.
I am a: Audio Engineer, Musician, Hobbyist
Submitted 5 months ago
Novation Impulse Explained
Excellent presentation! Very useful. Topic description of each video allows for easy navigation of the information available.
I am a: Hobbyist
You might be also interested in
Pro Tools has amazing MIDI features and virtual instruments. Do you know how to use them? Pro Tools 8 power user Eli Krantzberg will show you how starting at the beginning and taking it all the way to the end in this in-depth video series dedicated to the awesome power of MIDI in Pro Tools 8.
Pro Tools 10 is a major milestone for AVID and it's better than ever! Pro Tools master Eli Krantzberg is back with the definitive Pro Tools 10 guide, "Pro Tools 10 Explained". This is the best way to learn Pro Tools 10 if you're a new or intermediate user, so take the next step today.
Remixer extraordinaire Timothy Allan has done it again, bringing you a new smash hit product, "Producing Electronic Music". In this series, Tim shows you some of his most coveted tricks and techniques for producing a world-class electronic track.