iZotope RX Explained
Gary Hiebner presents comprehensive iZotope RX video tutorials! This is the definitive video manual for iZotope RX and takes you step-by-step from the beginning, covering every RX module in-depth, along with sonic examples of each module in-action. Groove3 is the only iZotope approved tutorial partner, so you know the info is correct. You also get all of the audio files used in the videos, so you can follow along on your system and both see and hear the effects in real-time. These videos are designed for new iZotope RX users.
RX Explained
• Introduction (02:15) - Gary gives you an introduction on what's going to be covered in the video series. And also mentions the new features and updates to RX.
• Setting Up Your Audio Device (03:41) - Here we go over how to setup your audio device correctly in RX 8.
• Taking a Look Around the Interface (10:08) - Gary shows you around the interface so you know where the modules, menu's and functions are all located and how to access them.
• Recording Audio (02:16) - In this video, we show you how to record audio into RX 8 for editing and processing.
• Using Shortcuts (04:44) - This video reveals some handy shortcuts to help speed up your audio editing and workflow in RX 8.
• Saving Formats (03:22) - See how to save to all the different formats available in RX 8.
• DeClick (07:25) - This video looks at the DeClick Module and how you can remove clicks from your audio quickly and easily.
• DeCrackle (04:20) - Watch how to use the DeCrackle module to remove troublesome crackle noise from your audio.
• Interpolate (03:37) - Here you'll see how use the Interpolate to automatically redraw waveform errors in your audio.
• DeClip (06:13) - If your audio is clipped you can use the DeClip module to correct and repair clipping issues as well as rebuild the clipped sections.
• DeHum (08:57) - In this video Gary show's you how to use the degum module to remove unwanted hum from your audio files. There are two modes in this module: Static and Dynamic. And both modes are explained and when they should be used.
• Mouth DeClick (04:24) - Watch how to use this module to easily remove click sounds coming from the mouth.
• Breath Control (04:32) - This video shows you how to use the Breath Control module to effectively remove breath noises from speech.
• DePlosive (04:07) - Discover how to reduce and/or remove the hard consonant plosive sounds in your vocal recordings.
• DeEss (08:34) - This video goes over how to use the DeEss module to reduce and remove sibilance from your voice recordings.
• DeRustle (04:59) - Here we show you how to remove rustle sounds, picked up in your microphone recordings.
• DeWind (04:53) - Now see how to greatly reduce the sound of wind in your recordings.
• Voice DeNoise (07:45) - This video takes a look at the Voice DeNoise module and how you can use this over other noise modules to repair voice overs and vocal tracks.
• Spectral DeNoise (13:38) - Explore the difference Spectral de-noise makes and how to use this module to help you reduce/remove unwanted noise.
• Dialog Isolate (06:42) - In this video we go over the dialog Isolate module. This module allows you to isolate the dialog in an audio file from other sounds in the audio. For example isolating the dialog from a sound that has dialog and ambience noise in the background.
• Deconstruct (05:11) - The Deconstruct module is different than the Dialog isolate in that it allows you to separate tonal material. You have control over the tonal gain, and the noise gain and the plugin learnings the tonal and noise sounds, and allows you to adjust the gain of each.
• Ambience Match (07:05) - In this video we show you how you can take an audio file that has gaps in it where the background noise is missing, and then how you can learn a portion of the background noise and replace the gaps with this noise to have a more cohesive sounding audio file. The module has a static and complex mode. Gary shows you how to use each mode and how they differ.
• Restore Selection (03:00) - With the Restore Selection you can make a selection on your audio and restore the state of just that selection, not the whole audio file. Gary shows you how to make these selection and where in the history panel you go to restore just a selection.
• Spectral Repair (14:28) - This video looks at the Spectral Repair module and how you can use the sections in the module to help you repaint frequency areas.
• Spectral Editor in Logic (04:14) - The Spectral Editor is a plugin that can be used in Logic using the ARAR format. It contains to modes from the Spectral repair module: Attentuation and replace. Gary shows you how to setup and use the Spectral Editor plugin in Logic.
• Instant Process (05:25) - Explore the Instant Process parameter and how it can speed up your workflow and editing in RX 8.
• DeReverb (06:31) - In this video, we show you how to use the DeReverb module to remove reverberated signals in your audio tracks.
• Dialogue DeReverb (04:21) - This video goes over the Dialog DeReverb module and how it differs from DeReverb, as well as how you can use it on dialog.
• DeBleed (08:13) - See how to use the DeBleed module to help improve tracks by removing sound that has bled in from other sources.
• EQ (05:05) - This video shows you the EQ module in detail, and walks you through its interface.
• EQ Match (04:49) - Watch how you can match the EQ shape between two tracks using the EQ Match module, and more closely match their sound.
• Variable Pitch (05:51) - Now see how you can use the Variable Pitch module to fix pitch fluctuations in your audio material.
• Center Extract (05:18) - Watch how you can use Center Extract to extract the center information in your stereo audio files.
• Mixing, Phase, & Azimuth (09:29) - This video goes over the Mixing, Phase and Azimuth Utility modules and how you can use them effectively.
• Leveler (06:59) - Here we show you how to use the Leveler module to help you automatically create a Clip gain curve in your audio.
• Time & Pitch Modules (07:33) - See how you can use the Time & Pitch modules to change and fix timing and pitching issues in your audio.
• Fade, Gain, & Normalize (04:16) - This video goes over the Fade, Gain and Normalize utility modules and how to use them on your audio tracks.
• ReSample (04:50) - Watch how to use the ReSample module to correctly down-sample your audio for different purposes.
• Loudness (05:50) - This video shows you how to use the Loudness module to help you level out your audio to better match the various broadcast standards.
• Dither (04:58) - Learn about dither, what it is and how you can use the Dither module to dither your audio correctly.
• Module Chain (03:08) - Discover how you can build up your own module chains for faster and easier processing.
• Batch Processor (04:43) - This video expands on the Module Chain and shows you how to process multiple files at the same time through a module chain.
• Signal Generator (08:02) - See how you can effectively use the Signal Generator module in your projects.
• Composite View (03:14) - This video shows how to pack sounds into a composite view so that you can edit multiple files in one go.
• RX Connect & RX Monitor (03:48) - See how you can connect to RX 8 from your DAW to the standalone application, and how you can use RX Monitor to monitor audio coming into your DAW from another application.
• RX in Realtime as a Plug-In (03:01) - This video shows you how to use RX 8 as a realtime plug-in in your DAW.
• Music ReBalance (08:50) - Here we show you how you can rebalance the stems in a stereo file, and how you can export the stems to new tracks.
• Spectral Recovery (05:02) - Gary teaches you how you can recover band limited audio with the Spectral Recovery module.
• Guitar Amp (04:22) - This video shows you how you can reduce the noise recorded from a Guitar amp using the Guitar DeNoise module.
• Guitar DeSqueak & DePick (06:42) - See how you can reduce the amount of squeaks and picked sounds in your recorded guitar track.
• Logic & The Music Rebalance ARA Plug-In (04:32) - Gary shows you how to get the Music Rebalance ARA plug-in setup in Logic, and how it works in realtime through your DAW.
• Wow & Flutter (05:12) - This video goes over how you can use the Wow & Flutter module to remove the negative effects of wow and flutter from your recordings.
• Dialog Contour (03:53) - Watch how you can shape the pitch contour of a sound using the Dialog Contour module.
• Repair Assistant (07:49) - Wrapping your RX 8 journey up, Gary shows you how you can use the Repair Assistant to detect noise, clipping, clicks, pops, low-end hum and more audio damage, and repair it quickly and easily.
RX 10 Update
• Using the Repair Assistant in your DAW a sa Plug-In (03:43) - Here Gary shows you how the Repair Assistant can be used as a plug-in in your DAW. The video shows how to add it as an insert, and then how to pass the audio into the plugin so the repair assistant can learn the audio and then provide suggestions on the repair modules to use.
• The Text Navigation Tool (04:29) - This video shows how to use the Text Navigation too to transcribe your audio to text. This text shows up in tabs, which you can use to navigate and find specific audio points in your material.
• Different Speakers with the Text Navigation (02:27) - This video expands on the Text Navigation tools and shows you how RX determines different speaker voices in the audio and how you can jump between and select specific speaker audio parts.
• Having Control over the Feathering (02:13) - Here Gary shows you the updated feathering feature in RX10 and how you have control over the time and frequency with the feathering amounts.